Not all engagement rings without stones are the same

Not all engagement rings without stones are the same. Plain bands without any patterns or designs, such as plain domes or round rings, are the easiest to resize. If the ring has jagged, woven patterns or engraved patterns, the size adjustment will become more difficult because it may deform or complete the pattern. Many jewelers will tell you that if there is any type of pattern or design, your ring cannot be resized at all. Again, this is incorrect. Skilled jewelers can usually adjust it to 1 size of the entire size without obvious signs of changing the ring pattern. On softer metals (such as gold), the ring will be scratched, and the engraving will wear out over time; but on hard metals (such as tungsten), the engraving will not wear out because it is difficult to scratch the ring. As long as you wear the ring on your finger, no matter which metal you choose, the engraving in the ring will not wear out. The engraving will wear off, which means your skin is harder than metal, which is impossible. Over time, wearing a ring on a necklace may wipe away the nicks engraved on the gold ring.
Today, the most influential bridal jewellery designers have created silver engagement rings, these engagement rings adopt the same design as previously reserved for its high-end platinum and platinum engagement rings series. The price of platinum is even higher, at about $1,700 per ounce. Argentine silver is actually the whitest metal in bridal jewelry. It is even whiter than platinum and only sells for a fraction of the price. Fine silver is better than platinum because it does not require any rhodium plating to make it look white. Platinum is really not platinum. Due to the use of gold, the color is yellow. It must be plated with a white metal called rhodium to make it look white. The coating will wear out over time, so the ring needs to be re-plated frequently to maintain its appearance. Silver is also hypoallergenic. It does not contain nickel like platinum. For those who prefer precious metal engagement rings to alternative metal rings (not of high value) such as titanium, silver engagement rings is gaining popularity. Jewelers who keep up with technological progress understand laser engraving and provide it to customers. Although laser engraving or marking machines have existed for decades and have been used in many industrial applications, it is only recently that this type of engraving has been applied to jewelry. The most common type of laser used for laser engraving is the Yttrium Aluminum Garnet (YAG) laser. YAG is an abbreviation for the type of crystal used by this laser to focus the laser beam. To engrave, the laser basically burns your information onto the surface of the ring. From soft gold to extremely hard tungsten, this engraving can be safely used on all types of metals. A big advantage of laser engraving is that more types of fonts can be selected, and almost any symbol or picture can be engraved. https://www.iprimo.hk/en/engagement/